PURSUIT OS 335 Owner's Manual download pdf (Page 112)

OS 335

112

PLACING AN ELECTRIC OR FUEL BURNING HEATING UNIT IN THE BILGE AREA CAN

BE POTENTIALLY HAZARDOUS AND IS NOT RECOMMENDED.

Proper storage is very important to prevent serious damage to the boat. If the boat is to be stored indoors,

make sure the building has enough ventilation. It is very important that there is enough ventilation both inside

the boat and around the boat. If the boat is to be stored indoors or outdoors, open all drawers, clothes lockers,

cabinets, and doors a little. If possible, remove the upholstery, mattresses, clothing, and rugs. Then hang a

commercially available mildew protector in the cabin.

12.3 Recommissioning

DO NOT OPERATE THE BOAT UNLESS IT IS COMPLETELY ASSEMBLED. KEEP ALL

FASTENERS TIGHT. KEEP ADJUSTMENTS ACCORDING TO SPECIFICATIONS.

BEFORE LAUNCHING THE BOAT, MAKE SURE THE HULL DRAIN PLUG IS INSTALLED.

REACTIVATING THE BOAT AFTER STORAGE:

• Charge and install the batteries.

• Install the drain plug in the hull.

• Check the engines and generator for damage and follow the manufacturer’s instructions for recommissioning.

• Check the engine's mounting bolts to make sure they are tight.

• Perform all routine maintenance.

• Check all hose clamps for tightness.

• Pump the antifreeze from the fresh and raw water systems and flush several times with fresh water. Make

sure all antifreeze is flushed from the water heater and it is filled with fresh water before it is activated.

• Check and lubricate the steering system.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 135 136

No comments

PURSUIT OS 335 Owner's Manual Page 112