PURSUIT 2470 CENTER CONSOLE Owner's Manual download pdf (Page 59)

2470 CENTER CONSOLE

To operate the macerator discharge pump, open the ball valve at the overboard discharge thru-

hull and set the Y-valve to the macerator pump position. Then activate the momentary macerator

switch, located in the stern bellow the battery switch, until the tank is emptied. Release the switch

and close the discharge ball valve when pumping is complete.

DO NOT ALLOW THE OVERBOARD MACERATOR DISCHARGE PUMP TO RUN

DRY FOR MORE THAN 10 SECONDS. SERIOUS DAMAGE TO THE MACERATOR

PUMP WILL RESULT.

Maintenance

The head should be cleaned and inspected for leaks regularly.

The holding tank should be pumped out and flushed as needed. Periodically add chemical to the

holding tank to help control odor and to chemically break down the waste. See the head

manufacturer owner’s manual for additional operating and maintenance information.

Periodically spray the macerator pump with a metal protector.

THE HEAD SYSTEM MUST BE PROPERLY WINTERIZED BEFORE WINTER LAY-

UP. SEE SECTION ON WINTERIZING.

9-3

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 121 122

No comments

PURSUIT 2470 CENTER CONSOLE Owner's Manual Page 59