PURSUIT 2870 OFFSHORE Owner's Manual download pdf (Page 99)

2870 OFFSHORE

Anodized Aluminum Surfaces

Anodized aluminum should be washed periodically with soap and water to keep it clean. If the boat

is used in saltwater or polluted water, the aluminum should be washed with soap and water after

each use. Saltwater allowed to remain on anodized aluminum will penetrate the anodized coating

and attack the aluminum.

Hard tops with aluminum frames, Bimini tops and towers with canvas and/or fiberglass tops require

special attention to the anodized aluminum just below the top. This area is subject to salt build up

from salty condensation and sea spray. It is also frequently overlooked when the boat is washed

and will not be rinsed by the rain. Consequently, the aluminum just below the top is more likely

to become pitted than the exposed aluminum on the structure. Make sure the aluminum in this area

is washed frequently with soap and water and rinsed thoroughly. Pay particular attention to places

where the top material and lacing contact the frame. Once a month coat the entire frame with a metal

protector made for anodized aluminum to protect against pitting and corrosion caused by the harsh

effects of saltwater. The anodized aluminum used on your Pursuit was coated with a metal protector

called Aluma Guard at the factory. Aluma Guard is a nonabrasive marine metal protector that

protects anodized aluminum, stainless steel, brass, and chrome. It also protects color anodizing

from fading and discoloring due to harmful ultraviolet rays. It is available from Rupp Marine Inc.,

4761 Anchor Avenue, P.O. Drawer F, Port Salerno, FL 34992.

ONE DRAWBACK TO ALUMA GUARD AND OTHER METAL PROTECTORS IS THAT THEY

CAN MAKE THE METAL SLIPPERY. THEREFORE, THEY SHOULD BE NOT BE USED

ON TOWER LADDERS, STEERING WHEELS AND OTHER AREAS WHERE A GOOD GRIP

AND SURE FOOTING IS IMPORTANT.

Stains can be removed with a metal polish or fine polishing compound. To minimize corrosion,

use a caulking compound to bed hardware and fasteners mounted to aluminum fabrications. If the

anodized coating is badly scratched it can be touched up with paint. With proper care, anodized

aluminum will provide many years of service.

Note: You should contact Pursuit Customer Relations before making any modifications to

aluminum fabrications. Unauthorized modifications can void the warranty.

Chrome Hardware

Use a good chrome cleaner and polish on all chrome hardware.

Acrylic Plastic Glass

Acrylic glass scratches easily. Never use a dry cloth or glass cleaning solutions on acrylic. Use a

soft cloth and mild soap and water for routine cleaning. Solvents and products containing ammonia

can permanently damage acrylic plastic glass.

13-3

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 139 140

No comments

PURSUIT 2870 OFFSHORE Owner's Manual Page 99