PURSUIT 2870 OFFSHORE Owner's Manual download pdf (Page 19)

2870 OFFSHORE

Chapter 1:

PROPULSION SYSTEM

1.1 General

The Pursuit 2870 Offshore is designed to be powered with twin 2 cycle outboard motors. Most

outboard motors used on your Pursuit use an oil injection system. Oil is automatically injected in

the engines and mixed at the proper ratio from two oil tanks located in the stern bilge below the bait

and rigging station.

Note: Always monitor the oil level in the tanks and only use the type of oil specified by the

engine manufacturer.

Each manufacturer of the various outboard motors provides an owner’s information manual with

its product. It is important that you read the manual(s) very carefully and become familiar with the

proper care and operation of the engine and drive system. A warranty registration card has been

furnished with each new engine and can be located in the engine owner’s manual. All information

requested on this card should be filled out completely by the dealer and purchaser and then returned

to the respective engine manufacturer as soon as possible.

DO NOT ATTEMPT TO SERVICE ANY ENGINE OR DRIVE COMPONENT WITHOUT BEING

TOTALLY FAMILIAR WITH THE SAFE AND PROPER SERVICE PROCEDURES. CERTAIN

MOVING PARTS ARE EXPOSED AND CAN BE DANGEROUS TO SOMEONE UNFAMILIAR

WITH THE OPERATION AND FUNCTION OF THE EQUIPMENT.

2870 Offshore

1-1

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 139 140

No comments

PURSUIT 2870 OFFSHORE Owner's Manual Page 19