PURSUIT 2870 OFFSHORE Owner's Manual download pdf (Page 111)

2870 OFFSHORE

Note: It is important and recommended that the fitting out procedure for the marine gear

be done by a qualified service person. Read the engine owner’s manual for the

recommended procedure.

BEFORE LAUNCHING THE BOAT, MAKE SURE THE HULL DRAIN PLUG IS INSTALLED.

Reactivating The Boat After Storage:

• Charge and install the batteries.

• Install the drain plug in the hull.

• Check the engines for damage and follow the manufacturer’s instructions for recommis-

sioning.

• Check the engines mounting bolts to make sure they are tight.

• Perform all routine maintenance.

• Check all hose clamps for tightness.

• Pump the antifreeze from the fresh and raw water systems and flush several times with

freshwater. Make sure all antifreeze is flushed from the water heater and it is filled with

freshwater before it is activated.

• Check and lubricate the steering system.

• Clean and wash the boat.

• Install all upholstery, cushions and canvas.

After Launching:

• Carefully check all water systems and the engine bolts for leaks. Operate each system one at

a time checking for leaks and proper operation.

• Check the bilge pump manual and automatic switches.

• When the engines start, check the cooling system port below the engine cowling for a strong

stream of water. This insures that the cooling pump is operating.

14-7

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 139 140

No comments

PURSUIT 2870 OFFSHORE Owner's Manual Page 111