PURSUIT OS 285 Owner's Manual download pdf (Page 55)

Exterior Equipment

7-1

Section 7

OS 315

Exterior Equipment

7.1 Deck

Rails and Deck Hardware

The rail system and hardware fittings per-

form specific functions. Secure fenders and

mooring lines to the cleats, not the rails or

stanchions. Be sure a clear lead exists when

running dock lines or anchor lines. A line

inadvertently run around a stanchion or over

the rail can cause damage.

Raise the flush-mounted stern cleats prior to

use.

Stern Cleats

Bow Pulpit and Roller

The bow pulpit is built into the hull and is

equipped with a roller assembly that allows

anchor operation and storage. The pulpit

roller is designed for a Delta® plow or a

Danforth® style anchor. A chain binder is

provided on the deck near the pulpit to

secure the anchor. Always make sure the

chain binder secures the anchor chain

before getting underway.

Anchor Chain Properly Secured For Travels

Anchor/Rope Locker

The anchor locker is in the bow of the boat

and accessed through a hatch in the deck.

Danforth® style anchors use a recessed

locker.

The anchor/rope locker drains by a thru-hull

fitting in the hull side near the bottom of the

locker. Check the drain frequently to make

sure it is clean and free flowing.

Anchor Locker

! CAUTION

Periodically inspect all fittings for

loose fit or wear and damage. Correct

any problems immediately.

! WARNING

Pursuit boats are not equipped with

hardware designed for towing pur-

poses. Do not use the mooring cleats

to towing another vessel or have this

boat towed.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 133 134

Comments to this Manuals

No comments