PURSUIT LS 235 Owner's Manual download pdf (Page 92)

LS 235

12.3 Recommissioning

DO NOT OPERATE THE BOAT UNLESS IT IS COMPLETELY ASSEMBLED. KEEP ALL

FASTENERS TIGHT. KEEP ADJUSTMENTS ACCORDING TO SPECIFICATIONS.

BEFORE LAUNCHING THE BOAT, MAKE SURE THE HULL DRAIN PLUG IS INSTALLED.

REACTIVATING THE BOAT AFTER STORAGE:

• Charge and install the batteries.

• Install the drain plug in the hull.

• Check the engines for damage and follow the manufacturer’s instructions for recommissioning.

• Check the engine's mounting bolts to make sure they are tight.

• Perform all routine maintenance.

• Check all hose clamps for tightness.

• Pump the antifreeze from the fresh and raw water systems and flush several times with fresh water. Make

sure all antifreeze is flushed from the water heater and it is filled with fresh water before it is activated.

• Check and lubricate the steering system.

• Clean and wash the boat.

• Install all upholstery, cushions and canvas.

AFTER LAUNCHING:

• Carefully check all water systems and the engine bolts for leaks. Operate each system one at a time

checking for leaks and proper operation.

• Check the bilge pump manual and automatic switches.

• When the engines start, check the cooling system port below the engine cowling for a strong stream of

water. This ensures that the cooling pump is operating.

• Carefully monitor the gauges and check for leakage and abnormal noises.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 115 116

No comments

PURSUIT LS 235 Owner's Manual Page 92