PURSUIT OS 385 Owner's Manual download pdf (Page 40)

4-8

Section 4 Electrical System

OS 385

4.5 AC Main Distribution

The AC MDP is located in the cabin. The

following are descriptions of the AC MDP

and the breakers that protect the accesso-

ries:

AC Multi-Meter

Use the arrow keys to scroll through digital

readouts for amperage (A), voltage (V),

cycles (hertz) (Hz) and watts (W).

• (A) Indicates the total amperage being

drawn through the AC MDP. It is the

total current level of all of the AC equip-

ment in operation at the time.

• (V) Indicates the voltage supplied to the

panel. Ideally the voltage should be

approximately 240 volts (230 for CE) but

never less than 208 volts.

• (Hz) Indicates cycles which should be

60 (50 for CE).

• (W) Indicates total watts being con-

sumed as a result voltage x amperage.

AC Main Breakers

The shore power or generator main breaker

protects the AC distribution. This breaker is

very sensitive. The resulting power surge

that occurs when connecting the dockside

cord or starting the generator may cause the

main breaker to trip. To avoid this surge,

always turn the selected main breaker to the

“OFF” position before plugging or unplug-

ging the shore power cord or starting or

stopping the generator.

The following components are protected by

either 120 or 240 Volt 60 Hz breakers for

domestic models. Certain export models

use only 220 Volt 50 Hz breakers for all com-

ponents:

240 Volt Circuits (Domestic Only)

Cabin Air Conditioning

Supplies electrical current directly to the

cabin air conditioner. This breaker will trip if

sea water is not being supplied to the air

conditioning unit. If this breaker trips, reset

and check for water flow out of the air condi-

tioning thru-hull. Refer to the air conditioner

owner’s manual for additional information.

Helm Air Conditioning

Supplies electrical current directly to the

helm air conditioner. The thermostat for the

AC Main Distribution Panel (AC MDP)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 143 144

Comments to this Manuals

No comments