PURSUIT OS 375 Owner's Manual download pdf (Page 26)

2-6

Section 2 Helm Systems

OS 375

2.12 Control Systems

Maintenance

Control Maintenance

Periodic inspection of the control systems

and all connections should be made. Signs

of rust, corrosion, wear, or other deteriora-

tion must immediately be serviced. Periodic

lubrication of all moving parts and connec-

tions with light waterproof grease is

required.

Control system adjustments may become

necessary. If adjustments are necessary,

see your Pursuit Dealer.

Steering System Maintenance

Periodically inspect all steering hoses, link-

ages and helm assemblies. Signs of corro-

sion, cracking, loosening of fastenings,

excessive wear, or deterioration must be

corrected immediately. Check the hydraulic

steering fluid level frequently and maintain

the proper level. Periodic lubrication of all

moving parts and connections with light

waterproof grease is required. Failure to do

so can lead to steering system failure and

result in loss of control.

When new, or after repairs, hydraulic steer-

ing systems may need to be purged of air.

Refer to the information provided with the

steering system for specifications and ser-

vice information. Check steering operation

and visually inspect for loose or missing

hardware before operating the boat. If you

suspect the steering system is damaged,

see your Pursuit dealer. DO NOT operate

the boat if you suspect the steering system

is malfunctioning.

Trim Tab Maintenance

Marine growth can affect the operation of the

trim tab planes and actuators. To help

reduce marine growth, return the trim tabs to

the full “UP” position after operating the

boat. Inspect and clean the actuators and

planes regularly.

The trim tabs also include a zinc anode to

help prevent galvanic corrosion. Galvanic

corrosion occurs when different metals are

submerged in an electrolyte. Sea water is an

electrolyte and submerged metal compo-

nents must be protected. Anodes were fac-

tory installed and need to be replaced when

they are 75% of their original size.

Refer to Routine Maintenance for informa-

tion regarding zinc anodes and the trim tab

owner’s manual for additional maintenance

information, fluid specifications and operat-

ing instructions.

! WARNING

LOSS OF CONTROL AND UNSAFE

BOAT HAZARD

Improper maintenance of steering

system is hazardous and can cause

death or serious injury from sudden

loss of control. Make sure all steering

hardware, cables and fluid levels are

regularly inspected and maintained.

DO NOT attempt to service any part of

the steering system unless you are

familiar or qualified to do so. Follow

all instructions regarding mainte-

nance procedures in the steering sys-

tem owner’s manual.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 134 135

Comments to this Manuals

No comments