PURSUIT 3000 OFFSHORE EXPRESS Owner's Manual download pdf (Page 80)

3000 EXPRESS

8.5 Maintenance

• Periodically lubricate all hinges and latch assemblies with a light oil.

• Periodically clean and coat gasket materials with silicone to help keep them pliable.

• The opening cabin deck hatches, port windows and the curved section in each front corner of

the windshield are made of acrylic plastic glass. Acrylic glass scratches easily. Never use a

dry cloth or glass cleaning solutions on acrylic glass . Use a soft cloth and mild soap and water

for routine cleaning. Solvents and products containing ammonia can permanently damage

acrylic glass. Please refer to the Routine Maintenance chapter for more information on the

proper maintenance for acrylic plastic glass.

• Periodic inspection and cleaning of the engine compartment ventilation ducts is necessary to

ensure adequate air circulation. A buildup of leaves, twigs, or other debris can severely reduce

ventilation. It also is important to be sure that the bilge water level does not accumulate to a level

that could restrict the ventilation ducts.

• The bilge blowers are permanently lubricated and require no maintenance. Blower operation

can and should be tested by placing a hand over the exhaust vents. Do not rely on the sound

of the blowers. A substantial amount of air should be exhausted by the blower. Frequently

check the intake vents for obstructions, preferably before each cruise.

• Periodically return the carbon monoxide alarm to the manufacturer for testing and recalibration.

Please refer to the carbon monoxide alarm manual or contact the manufacturer for more

information on maintaining and calibrating the alarm.

Note: Should blower noise become excessive, the source of the noise should be found

and corrected before operating the boat.

8-4

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 167 168

No comments

PURSUIT 3000 OFFSHORE EXPRESS Owner's Manual Page 80